Big Blue® 400X Pro
Miller
Big Blue® 400X Pro
400 A Engine Driven Generator
- The professional welder’s choice designed with the professional in mind, the Big Blue 400X Pro is the best for ease of use, reliability and fuel economy.
- Heavy duty low-speed industrial diesel engine KUBOTA
- Ultra-adaptive arc control. Unlike conventional DIG that provides a preset amount of short-clearing current, Miller-exclusive Dynamic DIG technology works on a time-based algorithm that automatically adjusts the amount of current required to clear a short. Delivers a smoother more consistent arc that can be tailored to match application, material, fit-up and welder technique.
- ArcReach® technology (option) Parameter control at the wire feeder or pendant without needing a control cord. An ArcReach system allows you to change weld settings from your ArcReach feeder or Stick/TIG remote, saving a trip to the power supply. ArcReach technology uses the existing weld cable to communicate welding control information between the feeder or Stick/TIG remote and the power source. This technology eliminates the need for control cords, and their associated problems and costs. ArcReach-equipped power sources work with non-ArcReach accessories; however the ArcReach benefit is only realized with the complete ArcReach system. This includes an ArcReach-equipped machine and one or more of the following accessories: • ArcReach SuitCase feeder • ArcReach Smart Feeder • ArcReach Stick/TIG Remote
- Digital meters with SunVision™ technology enable welding parameters to be viewed with greater clarity than analog meters — at virtually any angle. Meters can be seen clearly even in direct sunlight.
- Meters display Process settings for quick and easy setup • Preset and actual amperage.
- Simple-to-set controls require no elaborate procedure — just select process and weld.
- 10.000 watts of pure generator power. Plug in an extra Miller® inverter-based power source for a second welding arc.
- Thermal overload protection prevents machine damage if the duty cycle is exceeded or airflow is blocked.
- Arc control is beneficial when welding with stick and solid wires for easier fine-tuning of tough-to-weld materials and out-of-position applications.
- Low OCV stick (VRD), when enabled, reduces the open-circuit voltage to 30 volts when the welding power source is not in use, increasing operator safety without compromising arc starts.
- HD powder coat with zinc-rich primer protects sheet metal from rust and corrosion.
- Standard features include adjustable Hot Start,™ output contactor control, automatic idle, 120-volt block heater and Dynamic DIG™
- Easily update technology With the industrial USB port, you can easily upload the latest software and download machine log files to retrieve in-depth information from your machine such as diagnostics and statistics. Visit MillerWelds.com/support to download the latest software updates.
- Less noise Quieter jobsites are safer and more productive because work crews can communicate easier. The Big Blue 400X Pro is only 71.6 decibels (96 Lwa) under a full load, allowing for easier jobsite communication. Optional wireless interface control makes it easier to shut off your machine when it’s not in use, so you can lower jobsite noise levels and hear what’s going on around you.
- Jobsite safety Reduce the need to walk back to or climb into the truck bed to make process and parameter changes, or turn your machine on/ off. ArcReach® technology provides parameter control at the wire feeder or Stick/TIG remote and optional wireless interface control provides full front panel control in the palm of your hand, so you can lower the risk of encountering potential jobsite hazards.
- Mechanical contractors
- Structural steelwork
- Fabrication
- Maintenance
- Repair
- Rental
- Construction
- Pipe welding
0,8-1.6 mm solid, Cored wires DC Stick : 20 – 400 A MIG / flux-cored: 14 – 40 V DC TIG: 20 – 400 A CC/DC (TIG, Stick) CV/DC (MIG, FCAW) Width: 667 mm Height: 813 mm Length: 1.422 mmWeldable Metals Thin to thick, All materials, Wire Types and Diameters Input Hz 50 Hz Rated Output Weld Output Max Open Circuit Voltage 85 VDC
30 VDC Sense voltage for Lift-Arc™ TIG and stick with VRD on.Dimensions Weight 431 kg
- Stick (SMAW)
- MIG (GMAW)*
- Flux-cored (FCAW)*
- RMD®**
- Pulsed MIG (GMAW-P)**
- DC TIG (GTAW)
- Air carbon arc (CAC-A)
Rated: 4.8 mm (3/16 in.) carbons
Capable: 6.4 mm (1/4 in.) carbons
Catalogs : Big Blue® 400X Pro Catalog-1,
User Guides :
Related Products
