Engine Driven Welder

• D.C. Arc welding source multi-process
• Two independent welding output, each 250 A
• Single output 500 A
• Welding process:
  • Shielded Metal Arc welding SMAW (STICK)
  • Gas Tungsten Arc Welding GTAW (TIG contact start)
  • GMAW: wire welding (MIG)
  • FCAW: FLUX CORED
• Digital setting of welding parameters
• Stick easy start
• Arc force and multi-process parameters setting
• A.C. generator, single-phase and three-phase also avaible while welding
• Engine digital control
• Bunded base
• Base with forklift pockets
• Canopy suitable for stacking up max. 2 machines
• Single point lifting eye
• Large access for engine maintenance
• Meets EC directives for noise and safety

Accessories

• CTV4 Trolley

• RC2 Remote Control

• Wire Feeder

Technical Properties

ENGINE
Model	KUBOTA V1505
Output	24.5 kW (33 HP)
Cylinders / Displacement	4 / 1498 cm3
Fuel consumption (welding %60)	3.5 l/h
Total oil system capacity	6 l
Speed	3000 rpm
Cooled	Water
Total capacity	5.4 l
D.C. WELDING
DUAL CC (Stick - Tig)
Open circuit voltage	75 V (80 V peak)
Current range	20-250 A continuous
Duty cycle	230 A 60% 200 A 100%
DUAL CV (MIG - Flux cored)
-	-
Voltage regulation	16 - 40 V continuous
Duty cycle	230 A 60% 200 A 100%
SINGLE CC (Stick - Tig)
Open circuit voltage	75 V (80 V peak)
Current range	20-500 A continuous
Duty cycle	440 A 60% 400 A 100%
SINGLE CV (MIG - Flux cored)
-	-
Voltage regulation	16 - 40 V continuous
Duty cycle	440 A 60% 400 A 100%
A.C. GENERATION 50 Hz.
Three-phase power	12 kVA / 400 V / 17.3 A
Single-phase power	7 kVA / 230 V / 30.4 A
Single-phase power	5 kVA / 115 V / 43.5 A
Insulation class	H
GENERAL SPECIFICATIONS
Tank capacity	60 l
Start battery	12 V - 80 Ah - CCA 670 A
Running time (welding 60%)	15 h
Protection	IP 23
Guaranteed acoustik power Lwa	95 dB(A) (70 dB(A) @ 7m)
Dry weight	700 kg
Dimensions	1600x1000x790 mm

Product Brochure